Naphtho[2,3-c][1,2,5]thiadiazole and 2H-Naphtho[2,3-d][1,2,3]triazole-Containing D-A-π-A Conjugated Organic Dyes for Dye-Sensitized Solar Cells.

Dipolar dyes comprising an arylamine as the electron donor, a cyanoacrylic acid as electron acceptor, and an electron deficient naphtho[2,3-c][1,2,5]thiadiazole (NTD) or naphtho[2,3-d][1,2,3]triazole (NTz) entity in the conjugated spacer, were developed and used as the sensitizers in dye-sensitized solar cells (DSSCs). The introduction of the NTD unit into the molecular frame distinctly narrows the HOMO/LUMO gap with electronic absorption extending to >650 nm. However, significant charge trapping and dye aggregation were found in these dyes. Under standard global AM 1.5 G illumination, the best cell photovoltaic performance achieved 6.37 and 7.53% (∼94% relative to N719-based standard cell) without and with chenodeoxycholic acid (CDCA) coadsorbent, respectively. Without CDCA, the NTz dyes have higher power conversion efficiency (7.23%) than NTD dyes due to less charge trapping, dye aggregation, and better dark current suppression.

2H-[1,2,3]Triazolo[4,5-c]pyridine Cored Organic Dyes Achieving a High Efficiency: a Systematic Study of the Effect of Different Donors and π Spacers.

New D-A-π-A-based isomeric sensitizers, PTNn (n = 1-2) and NPTn (n = 1-5), were synthesized using 2H-[1,2,3]triazolo[4,5-c]pyridine (PT) as an auxiliary acceptor, triphenylamine or N,N-bis[4-(hexyloxy)phenyl]aniline as the donor, furan, thiophene, phenyl, or 3-hexylthiophene as the conjugated spacer, and 2-cyanoacrylic acid as the acceptor and anchor as well. They were used as the sensitizers of dye-sensitized solar cells. The NPTn dyes show better performance than the PTNn dyes. Among them, the best efficiency of 7.92% (∼96%, N719) was obtained with the NPT5 dye, indicating that the PT core could be used as a new building block for the design of high-performance sensitizers in the future. The negative Mulliken charge from the auxiliary acceptor was found to be useful as a semiempirical index for correlation of the molecular structure with the cell efficiency among structurally similar D-A-π-A-type congeners.

Eugenic metal-free sensitizers with double anchors for high performance dye-sensitized solar cells.

A series of new phenothiazine-based dyes (HL5-HL7) with double acceptors/anchors have been synthesized and used as the sensitizers for highly efficient dye-sensitized solar cells (DSSCs). Among them, the HL7-based cell exhibits the best efficiency of 8.32% exceeding the N719-based cell (7.35%) by ∼13%.

Organic dyes incorporating the dithieno[3',2':3,4;2″,3″:5,6]benzo[1,2-c]furazan moiety for dye-sensitized solar cells.

New D-π-A'-π-A type sensitizers (JH dyes), comprised arylamine as the electron donor, dithieno[3',2':3,4;2″,3″:5,6]benzo[1,2-c]furazan (DTBF) in the conjugated spacer, and 2-cyanoacrylic acid as both the acceptor and anchor, have been synthesized. The JH dyes have broad absorption spectra covering the range of 350 to 600 nm with the highest molar extinction coefficient up to >40 000 M(-1) cm(-1). The dye-sensitized solar cells (DSSCs) fabricated from the dyes exhibited light-to-electricity conversions ranging from 1.42 to 6.18% under simulated AM 1.5 G illumination. Upon adding 10 mM CDCA as the coadsorbent, the best performance cell has the power conversion efficiency of 7.33%, which is close to that of N719-based standard DSSC (7.56%).

Incorporating a new 2H-[1,2,3]triazolo[4,5-c]pyridine moiety to construct D-A-π-A organic sensitizers for high performance solar cells.

Two new organic dyes (PTN1 and NPT1) of the configuration D-A-π-A, based on 2H-[1,2,3]triazolo[4,5-c]pyridine (PT) as a central linker, have been synthesized and used as the sensitizers for dye-sensitized solar cells. Compared with pyridal[2,1,3]thiadiazole-containing congeners, the new dyes have conversion efficiencies nearly 1 order higher due to alleviation of charge trapping. The best conversion efficiency of the cell reaches 6.05% (under AM 1.5G irradiation). Upon addition of the coadsorbent CDCA, the efficiency is boosted to 6.76%, which reaches ∼90% of the standard based on N719.

In situ gelation of PEG-PLGA-PEG hydrogels containing high loading of hydroxyapatite: in vitro and in vivo characteristics.

Thermosensitive hydrogels are renowned carriers that are used to deliver a variety of drugs with the aim of combating diseases. In this study, the injectability of thermosensitive hydrogels comprised of poly(ethylene glycol)-poly(lactic acid-co-glycolic acid)-poly(ethylene glycol) (PEG-PLGA-PEG, PELGE) and hydroxyapatite (HA) were examined for their ability to deliver bone morphological protein 2 (BMP-2). The physicochemical characteristics of PELGE, HA, and PELGE/HA hydrogel composites were investigated by (1)H NMR, GPC, FTIR, XRD, SEM, and TEM. The rheological properties, injectability, in vitro degradation, and in vivo biocompatibility were investigated. The hydrogel with a weight ratio of 4:6 of polymer to HA was found to be resistant to auto-catalyzed degradation of acidic monomers (LA, GA) for a period of 70 days owing to the presence of alkaline HA. Injectability was quantitatively determined by the ejected weight of the hydrogel composite at room temperature and was a close match to the weight amount predetermined by the syringe pump. The results not only revealed that the PELGE/HA hydrogel composite presented a minor tissue response in the subcutis of ICR mice at eight weeks, but they also indicated an acceptable tolerance of the hydrogel composite in animals. Thus, PELGE/HA hydrogel composite is expected to be a promising injectable orthopedic substitute because of its desirable thermosensitivity and injectability.

High-performance dye-sensitized solar cells based on phenothiazine dyes containing double anchors and thiophene spacers.

A series of new push-pull phenothiazine-based dyes (HL1-HL4) featuring various π spacers (thiophene, 3-hexylthiophene, 4-hexyl-2,2'-bithiophene) and double acceptors/anchors have been synthesized, characterized, and used as sensitizers for dye-sensitized solar cells (DSSCs). Among them, the best conversion efficiency (7.31%) reaches approximately 99% of the N719-based (7.38%) DSSCs fabricated and measured under similar conditions. The dyes with two anchors have more efficient interfacial charge generation and transport compared with their congeners with only single anchor. Incorporation of hexyl chains into the π-conjugated spacer of these double-anchoring dyes can efficiently suppress dye aggregation and reduce charge recombination.

Self-assembly behavior of amphiphilic poly(amidoamine) dendrimers with a shell of aniline pentamer.

A series of amphiphilic poly(amidoamine) dendrimers (PAMAM, G2-G5) composed of a hydrophilic core and a hydrophobic shell of aniline pentamer (AP) were synthesized and characterized. The modified dendrimers self-assembled to vesicular aggregates in water with the critical aggregation concentration (CAC) decreased in the order of G2 > G3 > G4 > G5. It was found that the modified dendrimers self-organized into spherical aggregates with a bilayer vesicular structures and that the dendrimers in higher generation have more order structure, which may be attributed to the crystallization induced by the compacted effect of AP segments. In addition, larger spherical vesicles were observed under acidic and alkaline conditions, as compared with sizes of aggregates in neutral medium. At low pH, the tertiary amine groups of PAMAM-AP were transformed to ammonium salts; the polarons were formed from AP units by doping with strong acids, thereby leading to the stability of vesicular aggregates being better than that in double distilled water. Nevertheless, in high pH environment, the deprotonation of PAMAM-AP caused the enhancement of π-π interactions, resulting in generation of twins or multilayered vesicles.

Nanocasting technique to prepare lotus-leaf-like superhydrophobic electroactive polyimide as advanced anticorrosive coatings.

Nanocasting technique was used to obtain a biomimetic superhydrophobic electroactive polyimide (SEPI) surface structure from a natural Xanthosoma sagittifolium leaf. An electroactive polyimide (EPI) was first synthesized through thermal imidization. An impression of the superhydrophobic Xanthosoma sagittifolium leaf was then nanocasted onto the surface of the EPI so that the resulting EPI was superhydrophobic and would prevent corrosion. Polydimethylsiloxane (PDMS) was then used as a negative template to transfer the impression of the superhydrophobic surface of the biomimetic EPI onto a cold-rolled steel (CRS) electrode. The superhydrophobic electroactive material could be used as advanced coatings that protect metals against corrosion. The morphology of the surface of the as-synthesized SEPI coating was investigated using scanning electron microscopy (SEM). The surface showed numerous micromastoids, each decorated with many nanowrinkles. The water contact angle (CA) for the SEPI coating was 155°, which was significantly larger than that for the EPI coating (i.e., CA = 87°). The significant increase in the contact angle indicated that the biomimetic morphology effectively repelled water. Potentiodynamic and electrochemical impedance spectroscopic measurements indicated that the SEPI coating offered better protection against corrosion than the EPI coating did.

Synthesis of electroactive mesoporous gold-organosilica nanocomposite materials via a sol-gel process with non-surfactant templates and the electroanalysis of ascorbic acid.

Electroactive mesoporous organosilica nanocomposites (EMONs) and electroactive mesoporous gold-organosilica nanocomposites (EMGONs) were successfully prepared in this work and were applied in ascorbic acid (AA) sensing. EMONs were synthesized by using an aniline pentamer (AP) as an electroactive segment which controlled the redox ability and influenced the degree of sensitivity of the nanocomposites towards AA. EMGONs were successfully prepared by a one-pot synthesis in HAuCl4 aqueous solution with different concentrations. Gold nanoparticles (AuNPs) were selectively reduced on an AP segment in an EMON matrix, which acted as a reductant as well as providing a large surface area to absorb and react with chloroaurate anions (AuCl4 -). The gold particle size can be controlled by varying the concentration of HAuCl4 (aq.), and distributed AuNPs with controllable size were fabricated for the EMGONs. A sensor constructed from an EMGON-modified carbon-paste electrode (CPE) demonstrated 21-fold and 6.3-fold higher electrocatalytic activity towards the oxidation of AA compared to those constructed using a bare CPE and EMON-modified CPE, respectively. The high surface area of the EMGON-modified CPE exhibited a good electrochemical response towards AA at a low oxidative potential with good stability and sensitivity and a wide linear analytical detection range.

Compatibility enhancement of polyimide-silica hybrid sol-gel materials without incorporation of silane-coupling agent.

A facile route has been developed to enhance compatibility between organic polyimide matrix and dispersed phase of inorganic silica particles without addition of conventional silane-coupling agent. The as-prepared hybrid sol-gel materials having reduced size of SiO2 particle dispersed in polyimide matrix were successfully synthesized through pre-catalyzed sol-gel route using an organic diamine base. The PI-silica hybrid materials through conventional polyamic acid-catalyzed sol-gel route with/without silane-coupling agent were also prepared for comparative control studies. Morphological feature of as-prepared sol-gel materials prepared from three different approaches was also compared based on the studies of transmission electron microscopy. Effects of the material composition, in three different catalyzed routes, were investigated by thermal stability, mechanical strength, optical clarity, gas barrier and water absorption measurements of polyimide and a series of polyimide-silica hybrid sol-gel materials, respectively.